DM2, 1959 and earlier
- these distributors use two screws to retain the points
12 V
negative
CCW
LU-241LS $139.95
9LU-241LS $198.45
12 V
positive
CCW
LU-241LSP12 $154.95
n/a
4
DM2, 1960 and later
- these distributors use one screw to retain the points
12 V
negative
CCW
LU-149 $154.95
9LU-149 $206.45
12 V
positive
CCW
LU-149P12 $169.45
n/a
4
59D4 41882A, 41907A
12 V
negative
LU-243 $149.45
9LU-243 $206.45
6
DMBZ6,
DMBZ6A
12 V
negative
LU-165 $147.45
9LU-165 $205.95
12 V
positive
n/a
6
22D6
12 V
negative
CCW
LU-166A $124.95
9LU-166A $177.45
12 V
positive
CCW
n/a
6
23D6
12 V
negative
CCW
9LU-162A $185.95
12 V
positive
CCW
n/a
6
25D6
12 V
negative
CCW
9LU-162A $185.95
12 V
positive
CCW
n/a
6
43D6 and
45D6 with red* fixed
points,
see Note 1.
*Points
color based on original Lucas color.
Click on picture for full size.
12 V
negative
CCW
LU-163 $134.45
9LU-163 $195.95
6
45D6 with blue* sliding
points,
see Note 1.
*Points
color based on original Lucas color.
Click on picture for full size.
12 V
negative
CCW
LU-164 $139.95
9LU-164 $199.95
6
45DE6 factory
electronic ignition
12 V
negative
CCW
LU-161 $175.45
9LU-161 $226.95
6
45DM6 factory
electronic ignition
12 V
negative
CCW
LU-167 $175.45
9LU-167 $226.95
6
59D6
12 V
negative
LU-263 $149.45
9LU-263 $199.95
6
DVX6A,
DXH6A distributors
12 V
positive
CCW
n/a
12 V
negative
CCW
9LU-168LS $269.95
8
35D8
12 V
negative
CW,
CCW
LU-181A $139.95
9LU-181A $195.95
8
35DE8, 35DLM8,
35DM8 electronic dist.
12 V
negative
CW,
CCW
LU-281 $185.95
9LU-281 $235.95
8
40068F, dual point w
vacuum advance
12 V
negative
CCW
LU-186 $309.45
9LU-186 $339.95
12
36DE12 factory
electronic ignition
12 V
negative
CCW
9LU-1122A $249.95
12
36DM12 factory
electronic ignition
12 V
negative
CCW
LU-1121A $199.95
Unless noted,
the Lucas kits above fit the indicated distributor equipped
with or without vacuum advance.
Note 1. There are two distributor shafts found
in 43D4, 45D4, 43D6, and 45D6 distributors. The more common shaft has a longer points
cam than the relatively rare shaft with a short cam. The Ignitors in the
list above will only work in distributors that have the longer points cam.
To determine which you have measure the distance between the top of the
distributor shaft and the top edge of the points cam. If it is about
.420" you have the long cam and the Ignitors will work properly. If
the dimension is about .525" you have the short cam and the Ignitors will
not work.
