Retro Rockets is a distributor of PerTronix Ignition Systems

 

PerTronix Ignitor and Ignitor II
         
Year Cyl

Application

Ignitor Ignitor II
Part No. Price Part No. Price
'56-'63 4  Consul, 12 V negative ground LU-142A
$71.65
n/a
'56-'63 4  Consul, 12 V positive ground LU-142AP12
$79.55
n/a
'56-'67 4  Anglia, 12 V negative ground LU-142A
$71.65
n/a
'56-'67 4  Anglia, 12 V positive ground LU-142AP12
$79.55
n/a
'64-'66 4  Cortina Lotus, 12 V negative ground LU-148
$83.50
n/a
'64-'66 4  Cortina Lotus, 12 V positive ground LU-148P12
$91.40
n/a
'64-'70 4  Cortina, 12 V negative ground LU-142A
$71.65
n/a
'64-'70 4  Cortina, 12 V positive ground LU-142AP12
$79.55
n/a
'66-'72 4  Zephyr 1248
$113.15
n/a
'66-'79 4  Capri, Escort 1248
$113.15
n/a
1967 4  Taunus 12M, 15M 1847V
$69.95
n/a
'67-'68 4  Taunus 17M, 20M 1847V
$69.95
n/a
'67-'69  4  Corsair 1248
$113.15
n/a
'68-'74 4  Escort 1600cc LU-142A
$71.65
n/a
'72-'79 4  Cortina 1248
$113.15
n/a
'72-'79 4  Consul 1248
$113.15
n/a
'75-'79 4  Escort 1847V
$69.95
n/a
'78-'80 4  Cortina 2300 1847V
$69.95
n/a
All 4  With Lucas Dist. # 43D4, see Note 1. LU-143
$71.65
9LU-143
$103.40

Note 1.  There are two distributor shafts found in 43D4 distributors.  The more common shaft has a longer points cam than the relatively rare shaft with a short cam.  Remove the rotor and measure the distance from the top of the distributor shaft to the top of the points cam.  A dimension of about .420" indicates the shaft with the longer points cam.  Distributors with this shaft will take the Ignitors indicated in the table above.  A dimension of about .525" indicates the short points cam.  The Ignitors will not work in distributors with this shaft.

40,000V Flame-Thrower Coil
For use with standard Ignitors
Application Part Number
Price
Chrome Black Epoxy
All 4 cylinder 40501
$34.50
40511
$31.00
40611
$37.50
45,000 V Flame-Thrower II Coil
For use with Ignitor II only
Application Part Number
Price
Chrome Black Epoxy
All 4, 6 and 8 cylinder
with Ignitor II
45001
$37.50
45011
$34.00
45111
$41.00

There are no custom wire sets available for these applications.